The sliding boot floor makes it easier to move
heavy objects inside the boot.
separation network
Separation net behind the
rear seat (Variant)
Shift trunk floor
— Open the tailgate.
— Hold down the handle key
ÿ fig. 176 1 and move the floor along the guides
forwards or backwards.
— If necessary, close the tailgate.
Removing the sliding boot floor
— Open the tailgate.
— Hold down the handle button ÿ fig.
177 1 and remove the floor from the guides by
pulling up on the handle in the direction of the
arrows.
— If necessary, close the tailgate.
Fitting the sliding boot floor
Fig. 178 In the boot: hook the partition net.
— Open the tailgate.
— Place the sliding floor on the guides with the
handle facing the loading sill and hold down the
handle button ÿ fig. 177 1 until the floor is
positioned correctly on the guides.
— Check whether the sliding floor can be moved
correctly on the guides by holding down the handle
key.
— If necessary, close the tailgate.
WARNING
In the event of a sudden stop or an accident, objects could
be thrown through the passenger compartment and cause
serious injury or death.
Fig. 179 In the boot: remove the partition net.
· Fix the objects that you carry on the floor moves
ble from the trunk
· Never allow anyone to ride on the sliding boot
floor, not even a child.
The partition net can help prevent loose items being
carried in the boot from being thrown into the
passenger compartment, e.g. e.g., in the event of a
brake.
Hook the separation net
— Pull up the tab ÿ fig. 178 2 to remove the partition
.
net from the housing 4
— Hook the net on the right side 3 (enlarged
image).
— Hook the net into the slot on the left side ÿ
fig. 178 1 compressing the cross bar.
270
Transport of objects
The partition net is correctly installed when the T-
WARNING
shaped ends are firmly hooked into the corresponding
slots ÿ fig. 178 3 and 1
Improper handling of the separation net can cause
damage.
· Do not “drop” the separation net when lowering it;
Otherwise, the net and other parts of the vehicle
could be damaged. Guide the partition net all the
way down by hand.
Roll up the separation net
— Unhook the crossbar from the seats ÿ fig. 178 3
.
and 1
— Roll the net into the casing 4 guiding it all the way
down by hand.
Partition net with
the rear seat backs
folded down
Removing the partition net The
partition net can be removed from the passenger
compartment or from the boot.
— If you are going to remove the net from the passenger
compartment, fold the rear seat backrests forwards ÿ
p. 99.
— OR: if you are going to remove the net from the suitcase
ro, remove the boot cover ÿ p. 266.
— Press the unlock button left or right ÿ fig. 179 1 in
the direction of the arrow.
— Remove the casing from the holder in the direction of
.
the arrow ÿ fig. 179 2
— After removal, stow the partition net safely in the boot
or, depending on equipment, under the boot floor.
Installing the partition net
Fig. 180 Fit the partition net on the rear seat backrests.
The partition net can be installed from the passenger
compartment or from the boot.
— If you are installing the net from the passenger
compartment, fold the rear seat backrests forwards
ÿ p. 99.
— OR: if you are installing the net from the boot,
remove the boot cover ÿ p. 266.
— Place the deck on the left and right brackets.
right.
— Press the casing into the left and right brackets in the
opposite direction of the arrow ÿ fig. 179 2 . The
casing fits.
The red markings on the unlocking keys ÿ fig.
179 1 should no longer be seen.
Fig. 181 In the boot: partition net attached with the rear
seat backs folded down.
WARNING
· Always secure objects, even when the separation
net is correctly installed.
The partition net can help prevent loose items being
carried in the boot from being thrown into the passenger
compartment, e.g. e.g., in the event of a brake.
· When the vehicle is in motion, do not allow anyone
to remain behind the installed separation net.
3 G 0 0 1 2 7 6 0 A H
271
separation network
Mount the separation net
· When the vehicle is in motion, do not allow anyone
to remain behind the installed separation net.
— Open the right rear door.
— Fold the rear seat backs forward.
sero.
WARNING
— Remove the separation net from the side supports
ÿ p. 271.
Improper handling of the separation net can cause
damage.
— Place the net housing in the recesses of the
· Do not “drop” the separation net when lowering it;
Otherwise, the net and other parts of the vehicle
could be damaged. Guide the partition net all the
way down by hand.
.
clamping guides ÿ fig. 180 1
— Push the net casing to the left side of the vehicle, in
until the
the direction of the arrow 2
stop.
,
· Do not raise the rear seat backrests until the partition
net has been removed.
— Check that the network is set correctly.
Hook the separation net
— Pull up the tab ÿ fig. 181 2 to remove the partition net
luggage compartment equipment
Storage in the trunk
.
from the housing 4
— Hook the net on the right side 3 (enlarged image).
— Hook the net into the housing on the left side
I want 1 by compressing the crossbar.
The partition net is correctly installed when the T-
shaped ends are firmly hooked into the corresponding
slots 3 and 1
Roll up the separation net
— Disengage the cross bar from the housings.
ments arranged in the trims of the roof rails.
— Roll the net into the casing ÿ fig. 181 4 guiding it
all the way down with your hand.
Fig. 182 In the boot: side storage compartment with
side element (saloon).
Dismantle the separation net
— Open the right rear door.
— Pull out the net casing approx. 5 cm in the
opposite direction of the arrow ÿ fig. 180 2
.
— Pull the net housing out of the clamping guides 1
.
— Raise the rear seatbacks again
ro.
— Depending on the equipment, once removed, the
partition net can be stowed under the variable boot
floor ÿ p. 267.
WARNING
In the event of a sudden stop or an accident, objects could
be thrown through the passenger compartment and cause
serious injury or death.
Fig. 183 In the boot: side storage compartment with
side element (Variant).
· Always secure objects, even when the separation
net is correctly installed.
272
Transport of objects