CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
17 – Lubrication
1
Sump and oil pump
Note
♦ Finding metal shavings or a large quantity of small metal par‐
ticles during engine repair could indicate that the crankshaft
bearings or conrod bearings are damaged. To prevent this
from causing further damage, perform the following repairs:
♦ Thoroughly clean oil channels.
♦ Renew oil spray jets.
♦ Renew engine oil cooler.
♦ Renewing oil filter.
♦ The oil level must be at or below the max. mark - danger of
damage to catalytic converter!
Removing and installing coarse oil separator ⇒ page 213 .
Removing and installing lower part of sump ⇒ page 213 .
Removing and installing oil pump ⇒ page 216 .
Removing and installing sump upper part ⇒ page 218 .
Removing and installing oil pressure control valve - N428- (engine
codes CCZA, CCZB, CCZC, CCZD, CDAA, CDAB)
⇒ page 222 .
1.1
Assembly overview - sump, oil pump
210
Rep. gr.17 - Lubrication
2024 VW Passat Owner's Manual
VW Passat B7 Service & Repair Manual
VW Passat B6 Service & Repair Manual
