CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
Exhaust system (Golf, Eos, Scirocco)
♦ Do not bend the flexible joint in the front exhaust pipe by more
than 10° because it might otherwise be damaged.
♦ Renew seals, gaskets and self-locking nuts.
♦ After working on the exhaust system, ensure that the system
is not under stress and that there is sufficient clearance to the
bodywork. If necessary, loosen clamp and align silencers and
exhaust pipe so that sufficient clearance is maintained to the
bodywork at all points and the mountings are evenly loaded.
♦ The exhaust manifold and the turbocharger are one compo‐
nent. Removing and installing ⇒ page 432 .
Assembly overview - exhaust system (Golf 2004 ►, Eos, Scirocco,
engine codes CCTA, CCZA, CCZB) ⇒ page 532
Assembly overview - exhaust system (engine code CBFA)
⇒ page 534 .
Assembly overview - exhaust system (Golf 2009►, engine codes
CCZA, CCZB) ⇒ page 536
Assembly overview - exhaust system (Golf 2009 ►, engine codes
CCTA, CDAA) ⇒ page 538
Separating centre and rear silencers ⇒ page 539 .
Align exhaust system free of stress ⇒ page 540 .
Installation position and specified torque of clamp
⇒ page 541 .
Removing and installing catalytic converters with front exhaust
pipe ⇒ page 542 .
Checking exhaust system for leaks ⇒ page 544 .
Assembly overview - exhaust system (engine code CAWB)
2. Exhaust system (Golf, Eos, Scirocco)