CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
3
Fuel tank (Passat, CC)
Safety precautions when working on fuel supply system
⇒ page 278 .
Comply with rules for cleanliness ⇒ page 280 .
Assembly overview - fuel tank (engine codes CBFA, CCTA,
CCTB) ⇒ page 282 .
Drain fuel tank ⇒ page 283 .
Removing and installing fuel tank ⇒ page 287 .
3.1
Assembly overview - fuel tank (engine codes BZB, CAWA, CAWB, CGYA,
CCZA, CCZB, CDAA, CDAB)
1 - Fuel line
❑ Ensure firm seating
❑ Clipped onto fuel tank
2 - Cap
❑ Renew if damaged
3 - Bolt, 1.5 Nm
4 - Tank flap unit
❑ With rubber cup.
❑ Removing and installing
⇒ General body repairs,
exterior; Rep. gr. 55 ;
Tank flap unit; Remov‐
ing and installing fuel
tank flap unit .
5 - Breather line
❑ Clipped onto fuel tank
❑ Ensure firm seating
6 - Earth connection
❑ Ensure firm seating
7 - Fuel
❑ Emptying ⇒ page 283
❑ Removing and installing
⇒ page 287
8 - Securing strap
9 - Heat shield
10 - Clamping washer
11 - 25 Nm
❑ Renew
❑ To secure the securing
straps for the fuel tank,
only bolts with loose washers must be used. If different bolts are used, the securing straps might twist
during tightening. Bolts ⇒ ETKA (Electronic parts catalogue) .
12 - Seal
❑ Renew
❑ When installing, fit dry in fuel tank opening.
3. Fuel tank (Passat, CC)
281
2024 VW Passat Owner's Manual
VW Passat B7 Service & Repair Manual
VW Passat B6 Service & Repair Manual
