CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
2
Rules for cleanliness
When working on the fuel supply and injection system, pay careful
attention to the following “5 rules”:
♦ Thoroughly clean all joints and surrounding areas before dis‐
mantling.
♦ Place removed parts on a clean surface and cover them over.
Use lint-free cloths only.
♦ Carefully cover opened components or seal them if repairs
cannot be carried out immediately.
♦ Install only clean parts; do not remove new parts from pack‐
aging until immediately before installing. Do not use parts that
have been kept unpackaged (for example in toolboxes).
♦ If system is open: do not use compressed air if possible. Try
not to move the vehicle.
280
Rep. gr.20 - Fuel supply system