Table of Contents > Exhaust system

VW Passat B6 Service Manual ➜ Exhaust system

CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...  
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018  
26 – Exhaust system  
Exhaust system (Passat, CC)  
Do not bend the flexible joint in the front exhaust pipe by more  
than 10° because it might otherwise be damaged.  
Renew seals, gaskets and self-locking nuts.  
After working on the exhaust system, ensure that the system  
is not under stress and that there is sufficient clearance to the  
bodywork. If necessary, loosen clamp and align silencers and  
exhaust pipe so that sufficient clearance is maintained to the  
bodywork at all points and the mountings are evenly loaded.  
The exhaust manifold and the turbocharger are one compo‐  
nent, removing and installing ⇒ page 432 .  
Assembly overview - exhaust system (engine codes BZB, CAWA,  
CAWB, CGYA) ⇒ page 517 .  
Assembly overview - exhaust system (engine codes CCTA,  
CCTB, CCZA, CDAA, CDAB) ⇒ page 519 .  
Assembly overview - exhaust system (engine code CBFA)  
⇒ page 521 .  
Separating centre and rear silencers ⇒ page 522 .  
Align exhaust system free of stress ⇒ page 524 .  
Mounting position and specified torque of the clamping sleeve  
⇒ page 525  
Removing and installing catalytic converters with front exhaust  
pipe ⇒ page 526 .  
Checking exhaust system for leaks ⇒ page 528 .  
Assembly overview - exhaust system (engine codes BZB, CAWA, CAWB,  
1. Exhaust system (Passat, CC)  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW Passat you can write to us using the link below, describing your problem in detail, we try to answer all questions.

Ask your question on the page - Support!