CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
2
Charge air system
Caution
The screw-type clips on the charge air pipes must be tightened
to 5.5 Nm. If the torque is too low or too high, the charge air
hose may slip off the charge air pipe during vehicle operation.
Installing hose connections with plug-in connectors ⇒ page 431 .
Assembly overview - charge air cooling (Passat, CC, Tiguan, Eos)
Assembly overview - charge air cooler (Golf, Scirocco)
⇒ page 446 .
Assembly overview - sound generator (Golf, Scirocco)
⇒ page 448 .
Actuator for structure-borne sound - R214- and control unit for
structure-borne sound - J869- (Golf, Scirocco) ⇒ page 448 .
Turbocharging - overview ⇒ page 451 .
Removing and installing charge air cooler (Golf, Eos)
⇒ page 451 .
Removing and installing charge air cooler (Passat, CC, Scirocco)
⇒ page 453 .
Removing and installing charge air cooler (Tiguan) ⇒ page 454 .
Removing and installing charge air duct to sound generator (Golf,
Scirocco) ⇒ page 455 .
Checking charge air system for leaks ⇒ page 456 .
2.1
Assembly overview - charge air cooling
(Passat, CC, Tiguan, Eos)
Caution
The screw-type clips on the charge air pipes must be tightened
to 5.5 Nm. If the torque is too low or too high, the charge air
hose may slip off the charge air pipe during vehicle operation.
2. Charge air system
445