CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
♦ The -arrow- on the cover points forwards.
♦ Fuel lines are to be installed free of kinks.
♦ Ensure wiring/line connections are secured properly by pulling
back.
7.2
Removing and installing fuel gauge
sender - G-
Note
♦ Note safety precautions before beginning work ⇒ page 278 .
♦ Observe rules for cleanliness ⇒ page 280 .
♦ Assembly overview - fuel tank ⇒ page 281 .
Removing fuel gauge sender
– Remove fuel delivery unit ⇒ page 326 .
– Pull fuel gauge sender - G- slightly to side and upwards at the
same time.
– If the sender cannot be released in this way, the retaining tabs
-arrows- must also be pushed to the side slightly.
– Note colour co-ordination of cables for reinstallation.
330
Rep. gr.20 - Fuel supply system
CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
– Release electrical connectors -1 to 3- and pull them off. Then
bend back locking lugs of connectors.
Installing:
– Connect connectors -1…3-. Observe colour co-ordination.
– Check connectors are secured properly by pulling.
– Insert fuel gauge sender - G- into guide on fuel delivery unit
and press down until it engages.
– Install fuel delivery unit ⇒ page 328 .
7.3
Checking fuel pump
Note
When replacing fuel delivery unit, check fuel tank for heavy soiling
and clean if necessary.
7. Repairing fuel supply (Passat, CC)
331
2024 VW Passat Owner's Manual
VW Passat B7 Service & Repair Manual
VW Passat B6 Service & Repair Manual
