CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
2.2
Assembly overview - assembly mountings (Tiguan)
1 - Bolt
❑ Renew
1
❑
20 Nm + 90° ( / turn)
4
further
2 - Bolt
❑ Engine mounting to
body
❑ Renew
1
❑
40 Nm + 90° ( / turn
4
further)
3 - Engine mounting
4 - Bolt
❑ Engine mounting to
body
❑ Renew
1
❑
40 Nm + 90° ( / turn
4
further)
5 - Bolts
❑ Engine mounting to en‐
gine support
❑ Renew
1
❑
60 Nm + 90° ( / turn
4
further)
6 - Pendulum support
7 - Bolt
❑ Pendulum support to
subframe
❑ Bolt pendulum support
to gearbox and then to
subframe.
❑ Renew
1
❑
100 Nm + 90° ( / turn further)
4
8 - Bolt
❑ Pendulum support to gearbox
❑ Torque setting ⇒ Running gear, axles, steering; Rep. gr. 40 ; Assembly overview - Subframe, anti-roll
bar, suspension links
9 - Bolt
❑ Pendulum support to gearbox
❑ Torque setting ⇒ Running gear, axles, steering; Rep. gr. 40 ; Assembly overview - Subframe, anti-roll
bar, suspension links
10 - Bolts
❑ Gearbox mounting to gearbox
❑ Renew
❑ 60 Nm + 90° (1/4 turn) further
11 - Bolts
❑ Gearbox mounting to body
❑ Renew
2. Assembly mountings
23
CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
❑ 40 Nm + 90° (1/4 turn) further
12 - Gearbox mounting
❑ Illustration shows version for dual clutch gearbox.
13 - Engine support
14 - Bolts
❑ Engine support to engine
❑ Renew
1
❑
40 Nm + 180° ( / turn further)
2
2.3
Checking adjustment of assembly
mountings (engine and gearbox mount‐
ings)
There must be a distance -a- of at least 10 mm between engine
support and longitudinal member (right side).
The side surface of the engine support -2- should be located par‐
allel to the support arm -1-.
– If the conditions are not met, the assembly mountings must be
adjusted ⇒ page 21 .
2.4
Adjusting assembly mountings (Passat
2006 ▶, CC)
Note
If just the assembly mounting on the engine side is to be adjusted,
one hook - 10 - 222 A /10- will suffice on the engine side. There
is also no need to remove air filter, battery and battery carrier.
24
Rep. gr.10 - Removing and installing engine
2024 VW Passat Owner's Manual
VW Passat B7 Service & Repair Manual
VW Passat B6 Service & Repair Manual
