CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
2
Assembly mountings
⇒ “2.2 Assembly overview - assembly mountings (Tiguan)”, page
23 .
⇒ “2.3 Checking adjustment of assembly mountings (engine and
gearbox mountings)”, page 24 .
⇒ “2.4 Adjusting assembly mountings (Passat 2006 ▶, CC)”, page
24 .
⇒ “2.5 Adjusting assembly mountings (Golf, Eos, Scirocco)”, page
28 .
⇒ “2.6 Adjusting assembly mounting (Tiguan)”, page 32 .
2.1
Assembly overview - assembly mountings (Golf, Eos, Passat, CC, Sciroc‐
co)
1 - Bolt
❑ Gearbox support to
gearbox
❑ Specified torque ⇒ Rep.
gr. 34
2 - Bolts
❑ Pendulum support to
gearbox
❑ Torque setting ⇒ Run‐
ning gear, axles, steer‐
ing; Rep. gr. 40 ; As‐
sembly overview - Sub‐
frame, anti-roll bar, sus‐
pension links
3 - Engine support
4 - Bolt
❑ Engine support to en‐
gine
❑ Renew
1
❑
40 Nm + 180° ( / turn
2
further)
5 - Engine mounting
6 - Bolt
❑ Engine mounting to
body
❑ Renew
1
❑
40 Nm + 90° ( / turn
4
further)
7 - Support
8 - Bolt
❑ Support at engine
mounting
❑ Renew
1
❑
20 Nm + 90° ( / turn further)
4
2. Assembly mountings
21
CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
9 - Bolt
❑ Support to body
❑ Renew
1
❑
20 Nm + 90° ( / turn further)
4
10 - Bolt
❑ Engine mounting to body
❑ Renew
1
❑
40 Nm + 90° ( / turn further)
4
11 - Bolts
❑ Engine mounting to engine support
❑ Renew
1
❑
60 Nm + 90° ( / turn further)
4
12 - Pendulum support
13 - Bolt
❑ Pendulum support to subframe
❑ Bolt pendulum support to gearbox and then to subframe.
❑ Renew
1
❑
100 Nm + 90° ( / turn further)
4
14 - Bolt
❑ Gearbox mounting to gearbox support
❑ Renew
❑ 60 Nm + 90° (1/4 turn) further
15 - Bolt
❑ Gearbox mounting to body
❑ Renew
❑ 40 Nm + 90° (1/4 turn) further
16 - Gearbox mounting
❑ Illustration shows version for dual clutch gearbox.
17 - Bolt
❑ Gearbox support to gearbox
❑ Specified torque ⇒ Rep. gr. 34
18 - Rear final drive support
22
Rep. gr.10 - Removing and installing engine
CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
2.2
Assembly overview - assembly mountings (Tiguan)
1 - Bolt
❑ Renew
1
❑
20 Nm + 90° ( / turn)
4
further
2 - Bolt
❑ Engine mounting to
body
❑ Renew
1
❑
40 Nm + 90° ( / turn
4
further)
3 - Engine mounting
4 - Bolt
❑ Engine mounting to
body
❑ Renew
1
❑
40 Nm + 90° ( / turn
4
further)
5 - Bolts
❑ Engine mounting to en‐
gine support
❑ Renew
1
❑
60 Nm + 90° ( / turn
4
further)
6 - Pendulum support
7 - Bolt
❑ Pendulum support to
subframe
❑ Bolt pendulum support
to gearbox and then to
subframe.
❑ Renew
1
❑
100 Nm + 90° ( / turn further)
4
8 - Bolt
❑ Pendulum support to gearbox
❑ Torque setting ⇒ Running gear, axles, steering; Rep. gr. 40 ; Assembly overview - Subframe, anti-roll
bar, suspension links
9 - Bolt
❑ Pendulum support to gearbox
❑ Torque setting ⇒ Running gear, axles, steering; Rep. gr. 40 ; Assembly overview - Subframe, anti-roll
bar, suspension links
10 - Bolts
❑ Gearbox mounting to gearbox
❑ Renew
❑ 60 Nm + 90° (1/4 turn) further
11 - Bolts
❑ Gearbox mounting to body
❑ Renew
2. Assembly mountings
23
2024 VW Passat Owner's Manual
VW Passat B7 Service & Repair Manual
VW Passat B6 Service & Repair Manual
