Passat 2011 ➤ , Passat Variant 2011 ➤
Maintenance - Edition 01.2019
– Reset oil change service information by pressing OK button
-5- on multifunction steering wheel or OK button -1- on wind‐
screen wiper lever.
After a short time the display switches back to the original display.
Inspection service interval display: resetting
– Switch on hazard warning lights.
– With ignition switched off, press and hold button -3-.
– Switch on ignition.
– Release button -3-.
The service interval display is now in the resetting mode.
– Reset inspection service interval display by pressing OK but‐
ton -5- on multifunction steering wheel or OK button -1- on
windscreen wiper lever.
After a short time the display switches back to the original display.
4.54
Service interval display: recoding
Recoding from flexible to fixed intervals
ODIS Service
– Connect vehicle diagnostic tester .
– Switch on ignition.
– Carry out identification of vehicle.
152
4. Descriptions of work:
Passat 2011 ➤ , Passat Variant 2011 ➤
Maintenance - Edition 01.2019
ODIS Service
– Enter task data, or select “Without task”.
– Select “Control units”.
– Select “Dash panel insert”.
– Select “Guided Functions”.
– Select “Change flexible/fixed intervals”.
– Carry out adaptation according to the information of “Guided functions”.
Changing values for maximum distance to be driven (km) until
next oil change service (fixed) during delivery inspection
ODIS Service
– Connect vehicle diagnostic tester .
– Switch on ignition.
– Carry out identification of vehicle.
– Enter task data, or select “Without task”.
– Select “Control units”.
– Select “Dash panel insert”.
– Select “Guided Functions”.
– Select “Oil change service (fixed)”.
– Follow instructions in “Guided functions” mode.
– Reset “-1- Oil change service (fixed)”.
– Follow instructions in “Guided functions” mode.
The current values for maximum distance to be driven (km) until next oil change service are shown in the
display of the vehicle diagnostic tester .
– Select “No”.
– Select value for maximum distance to be driven until next oil change service, according to specifications
valid in your country.
– Carry out adaptation according to the information of “Guided functions”.
4. Descriptions of work:
153
Passat 2011 ➤ , Passat Variant 2011 ➤
Maintenance - Edition 01.2019
4.55
Sunroof: checking function, cleaning
and greasing guide rails
Carry out following procedure:
– Check function of sunroof.
– Clean guide rails -arrows- and grease with special grease G
060 751 A2.
4.56
Track rods: checking clearance, attach‐
ment and boots
Procedure
– Check play by moving track rods and wheels with the vehicle
raised (wheels hanging free). Clearance (specified): no clear‐
ance:
– Check that boots -arrow- are not damaged and are seated
correctly.
– Make sure that boots -1- of steering rack are not damaged and
are seated correctly.
– Perform visual inspection for leaks and damage in area of
steering rack including track rods.
4.57
Auxiliary heater: setting weekday in
menu of dash panel insert
As the weekday in the menu for the auxiliary heater is not linked
to the time and date setting for the dash panel insert, it must be
set separately.
154
4. Descriptions of work:
2024 VW Passat Owner's Manual
VW Passat B7 Service & Repair Manual
VW Passat B6 Service & Repair Manual
