Passat 2011 ➤ , Passat Variant 2011 ➤
Maintenance - Edition 01.2019
United Arab Emirates
Memory seat: initialising
All memories and settings will be cleared during the initialisation
process. The memory buttons can then be reprogrammed and
resynchronised with a remote control key.
– Open driver door.
– Move seat and seat backrest forwards to stop.
– When the seat backrest is fully forwards, release switch and
press again until a gong sounds after a few seconds.
Engine and components in engine com‐
partment: inspecting for leaks and dam‐
age (from above and below)
– Remove engine cover panel, if necessary ⇒ page 106 :
– If necessary, remove engine cover panel (noise insulation) -
bottom- ⇒ page 109 .
Inspect as follows:
– Check engine and components in engine compartment for
leaks and damage.
– Lines, hoses and connections
♦ Fuel system
♦ Cooling and heating system
♦ Lubrication system
♦ Air conditioning system
♦ Intake system
♦ And brake system
Check for leaks, abrasion, porousness, cracks, correct seating
and attachment in retainers.
4. Descriptions of work: