Passat 2015 ➤, Passat 2019 ➤, Passat Variant 2015 ➤, Passat Variant 2019 ➤
Maintenance - Edition 11.2020
4.59
Service interval display: resetting
Resetting service interval display using vehicle diagnostic tester
Resetting service interval display without vehicle diagnostic
tester ⇒ page 185
Additional information for service interval display ⇒ page 8
A reset of the service interval display during
♦ delivery inspection
♦ each oil change (flexible/fixed)
is carried out!
Note
It is also possible to reset the service interval display (SID)
manually. However, bear in mind that, on vehicles coded to
flexible interval, the SID needs to be coded to fixed intervals.
This also modifies the adaptation channel for oil quality.
4.59.1
Service interval display: resetting using
vehicle diagnostic tester
– Reset service interval display ⇒ page 30 .
– Select the respective service which is to be reset.
4.59.2
Service interval display: resetting with‐
out vehicle diagnostic tester
Oil change service interval display: resetting
Function button on dash panel insert:
– With ignition switched off, press and hold button -1-.
– Switch on ignition.
Wait until “Reset oil change service?” appears on the display.
on the display.
– Release button -1-.
The service interval display is now in the resetting mode.
– Briefly press button -1- once.
After a short time the display switches back to the original dis‐
play.
4. Descriptions of work
185
Passat 2015 ➤, Passat 2019 ➤, Passat Variant 2015 ➤, Passat Variant 2019 ➤
Maintenance - Edition 11.2020
Inspection service interval display: resetting
With function button on dash panel insert
– With ignition switched off, press and hold button -1-.
– Switch on ignition.
Wait until “Reset inspection?” appears on the display. on the
display.
– Release button -1-.
The service interval display is now in the resetting mode.
– Briefly press button -1- once.
After a short time the display switches back to the original dis‐
play.
4.60
Service interval display: recoding
Note
If the display is not as shown in the procedure: ⇒ Operating
instructions for vehicle diagnostic tester
Recoding from flexible to fixed intervals
ODIS Service
– Connect vehicle diagnostic tester ⇒ page 30 .
– Switch on ignition.
– Carry out identification of vehicle.
– Enter task data, or select “Without task”.
– Select “Control units”.
– Select “Dash panel insert”.
– Select “Guided Functions”.
– Select “Change flexible/fixed intervals”.
– Carry out adaptation according to the information of “Guided functions”.
Changing values for maximum distance to be driven (km) until
next oil change service (fixed) during delivery inspection
ODIS Service
– Connect vehicle diagnostic tester ⇒ page 30 .
– Switch on ignition.
– Carry out identification of vehicle.
186
4. Descriptions of work
2024 VW Passat Owner's Manual
VW Passat B7 Service & Repair Manual
VW Passat B6 Service & Repair Manual
