Download
Table of Contents > Descriptions of work > Poly V-belt: checking condition

VW Passat B8 Service Manual ➜ Poly V-belt: checking condition

Passat 2015 ➤, Passat 2019 ➤, Passat Variant 2015 ➤, Passat Variant 2019 ➤  
Maintenance - Edition 11.2020  
♦ Area around trim strips  
♦ Windscreen roof edge  
♦ Outer and inner A-pillar  
♦ Inner and outer bonnet  
♦ Wheel arches  
♦ Inner and outer tailgate  
4.27  
Poly V-belt: renewing  
Sequence of operations  
⇒ Rep. gr. 13; Cylinder block belt pulley end; Removing and  
installing poly V-belt  
4.28  
Poly V-belt: checking condition  
Sequence of operations  
– Crank engine at vibration damper on pulley using a socket.  
Check poly V-belt -1- for:  
♦ Sub-surface cracks (cracks, core ruptures, cross-sectional  
breaks)  
♦ Layer separation (top layer, cord strands)  
♦ Base disruption  
♦ Frayed cord strands  
88  
4. Descriptions of work  
Passat 2015 ➤, Passat 2019 ➤, Passat Variant 2015 ➤, Passat Variant 2019 ➤  
Maintenance - Edition 11.2020  
♦ Flank wear (material wear, frayed flanks, flank brittleness  
-glassy flanks-, surface cracks)  
NOTICE  
If faults are found, it is absolutely necessary to renew the  
poly V-belt.  
In the case of diesel engines, toothed belts which came  
into contact with oil, brake fluid, fuel or reducing agent,  
must always be renewed.  
In the case of petrol engines, toothed belts which came in‐  
to contact with oil, brake fluid, fuel or coolant, must always  
be renewed.  
This can avoid breakdowns and malfunctions.  
The replacement of a poly V-belt is a repair measure.  
4. Descriptions of work  
89  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW Passat you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!