Download
Table of Contents > Descriptions of work > Battery (12V): checking battery terminal clamps for secure seating

VW Passat B8 Service Manual ➜ Battery (12V): checking battery terminal clamps for secure seating

Passat 2015 ➤, Passat 2019 ➤, Passat Variant 2015 ➤, Passat Variant 2019 ➤  
Maintenance - Edition 11.2020  
– Switch on ignition.  
– Warning lamp “PASSENGER AIRBAG OFF” -arrow- goes  
out after self-test (passenger airbag activated).  
– Switch off ignition.  
4.4  
Battery (12V): checking battery termi‐  
nal clamps for secure seating  
4.4.1  
Battery (12V) in engine compartment:  
checking battery terminal clamps for  
secure seating  
Special tools and workshop equipment required  
♦ Torque wrench  
Note  
A securely seated battery terminal clamp ensures trouble  
free function and long service life of the battery.  
When securing terminal clamp, ensure that it is completely  
seated on battery terminal.  
NOTICE  
If the battery clamp is not seated securely on the positive  
terminal, disconnect battery earth strap at battery negative  
terminal first, to prevent possible accidents.  
– Open cover of heat shield sleeve -4-.  
4. Descriptions of work  
49  
Passat 2015 ➤, Passat 2019 ➤, Passat Variant 2015 ➤, Passat Variant 2019 ➤  
Maintenance - Edition 11.2020  
– Check battery -3- for secure seating. If necessary, retighten  
bolt -2- to specified torque.  
– Open cover -4- over battery negative terminal.  
– Check battery terminal clamps -1- and -5- for secure seating.  
If necessary, retighten nuts -2- and -6-.  
Specified torque  
Nm  
6
15  
Nut for battery terminal  
Bolt for securing bracket  
Carry out following procedures after connecting battery:  
Sequence of operations  
⇒ Electrical system; Rep. gr. 27; Battery; Disconnecting and  
connecting battery  
50  
4. Descriptions of work  
Passat 2015 ➤, Passat 2019 ➤, Passat Variant 2015 ➤, Passat Variant 2019 ➤  
Maintenance - Edition 11.2020  
4.4.2  
Battery (12V) in luggage compartment:  
checking battery terminal clamps for  
secure seating  
Special tools and workshop equipment required  
♦ Torque wrench  
Note  
A securely seated battery terminal clamp ensures trouble  
free function and long service life of the battery.  
When securing terminal clamp, ensure that it is completely  
seated on battery terminal.  
NOTICE  
If the battery clamp is not seated securely on the positive  
terminal, disconnect battery earth strap at battery negative  
terminal first, to prevent possible accidents.  
Only for Saloon  
– Remove service flap in left luggage compartment side trim.  
⇒ General body repairs, interior; Rep. gr. 70; Luggage com‐  
partment trims; Assembly overview - luggage compartment  
side panel  
Only for Estate  
– Remove battery cover ⇒ General body repairs, interior; Rep.  
gr. 70; Luggage compartment trims; Assembly overview -  
luggage compartment side trim.  
Continued for all vehicles  
– Check battery -4- for firm seating. If necessary, retighten bolt  
-1- to specified torque.  
– Open cover -5- over battery negative terminal.  
4. Descriptions of work  
51