Download
Table of Contents > Exhaust system > Secondary air system - engine code CBFA > Removing and installing secondary air inlet valve N112

VW Passat B6 Service Manual ➜ Removing and installing secondary air inlet valve N112

CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...  
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018  
– Slacken lines -1-, slacken bolts -2-, separate connector -3- and  
remove secondary air pump motor - V101- .  
Installing:  
Install in reverse order of removal.  
4.3  
Removing and installing secondary air  
inlet valve - N112-  
Removing:  
– Remove air filter ⇒ page 467 .  
– Remove battery and battery tray.  
– Pull connector -A- and hose -B- from secondary air inlet valve  
- N112- .  
4. Secondary air system - engine code CBFA  
559  
CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...  
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018  
– Loosen coolant pipe by unscrewing bolts -arrows-.  
– Unscrew bolts -arrows- and remove secondary air inlet valve  
- N112- .  
Installing:  
Installation is carried out in the reverse order. When installing,  
note the following:  
– Renew seals.  
560  
Rep. gr.26 - Exhaust system  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW Passat you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!