CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
Tightening sequence for coarse oil separator
– Tighten bolts in the sequence -1 … 9- to 9 Nm.
1.2
Removing and installing coarse oil sep‐
arator
Removing
– Remove noise insulation ⇒ General body repairs, exterior;
Rep. gr. 50 ; Noise insulation .
– Unscrew bolts -1 … 9- and remove coarse oil separator.
Caution
Danger of soiling lubrication system.
♦ Close opening with clean cloth.
Installing
Note
♦ Renew gaskets and seals.
♦ Secure all hose connections with the correct type of hose clips
(same as original equipment) ⇒ EKTA (Electronic parts cata‐
logue) .
Installation is basically carried out in the reverse sequence; note
the following when doing this:
– Tighten bolts in the sequence -1 … 9- to 9 Nm.
1.3
Removing and installing lower part of
sump
Special tools and workshop equipment required
1. Sump and oil pump
213
2024 VW Passat Owner's Manual
VW Passat B7 Service & Repair Manual
VW Passat B6 Service & Repair Manual
