Download
Table of Contents > Turbocharging/supercharging > Charge air system > Removing and installing charge air cooler, Tiguan

VW Passat B6 Service Manual ➜ Removing and installing charge air cooler, Tiguan

CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...  
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018  
– Unscrew bolts -1- for charge air cooler mountings.  
Note  
The securing bolts of the condenser are difficult to access. With  
the aid of a second mechanic, lift the charge air cooler out of the  
radiator mountings. The charge air cooler can now be moved  
»back and forth« to allow access to the securing bolts.  
– On the right-hand side of the charge air cooler unscrew pipes  
of condenser -arrow-.  
– Unbolt condenser from charge air cooler -arrows-.  
– Attach condenser to lock carrier using cable ties.  
– Take out charge air cooler from underneath.  
Installing:  
Installation is carried out in the reverse order. When installing,  
note the following:  
♦ Hose connections and hoses for charge air system must be  
free of oil and grease before assembly. The seal and sealing  
surface must be oiled lightly only for plug-in connectors  
⇒ page 431 .  
2.8  
Removing and installing charge air cool‐  
er, Tiguan  
– Removing radiator ⇒ page 275 .  
– Remove bumper cover ⇒ Bumpers; Rep. gr. 63 ; Removing  
and installing front bumper cover .  
– Unclip air deflector parts on left and right of lock carrier ⇒  
Body, front; Rep. gr. 50 ; Assembly overview - lock carrier .  
454  
Rep. gr.21 - Turbocharging/supercharging  
CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...  
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018  
– Unscrew bolts -arrows- for charge air cooler mountings.  
– Unbolt condenser from charge air cooler -arrows-.  
– Secure condenser to lock carrier with cable ties.  
– Remove charge air cooler downwards.  
Installing:  
Installation is carried out in the reverse order. When installing,  
note the following:  
♦ Hose connections and hoses for charge air system must be  
free of oil and grease before assembly. The seal and sealing  
surface must be oiled lightly only for plug-in connectors  
⇒ page 431 .  
2.9  
Removing and installing charge air duct  
to sound generator (Golf, Scirocco)  
Special tools and workshop equipment required  
♦ Engine bung set - VAS 6122-  
Removing:  
– Pull cover off air duct (release clips on sides) -arrows-.  
2. Charge air system  
455  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW Passat you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!