CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
3.3
Checking axial clearance of camshafts
Special tools and workshop equipment required
♦ Universal dial gauge holder - VW 387-
♦ Dial gauge - VAS 6079-
Test sequence
– Perform measurement with retaining frame removed.
– Fit camshaft to be tested in retaining frame.
– Attach dial gauge - VAS 6079- with universal dial gauge holder
- VW 387- to cylinder head.
– Press camshaft against dial gauge by hand.
– Set dial gauge to “0”.
– Press camshaft away from dial gauge and read off value:
•
Axial clearance: 0.05 to 0.17 mm
3.4
Renewing valve stem seals
⇒ “3.4.2 Removing and installing valve stem seals (cylinder head
removed)”, page 205
3.4.1
Removing and installing valve stem seals (cylinder head installed)
200
Rep. gr.15 - Cylinder head, valve gear
2024 VW Passat Owner's Manual
VW Passat B7 Service & Repair Manual
VW Passat B6 Service & Repair Manual
