CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
3
Oil filter, engine oil cooler and oil
pressure switch (engine codes CA‐
WA, CAWB, CBFA, CCTA, CCTB,
BZB, CGYA)
Removing and installing engine oil cooler ⇒ page 226 .
Removing and installing coarse oil separator ⇒ page 213 .
Checking oil pressure and oil pressure switch ⇒ page 227
Engine oil ⇒ page 224 .
3.1
Assembly overview - oil filter, engine oil cooler and oil pressure switch - F1-
1 - Ancillary bracket
❑ Removing and installing
⇒ page 50
2 - Oil pressure switch - F1-
❑ 1.4 bar - black
❑ Checking ⇒ page 227
❑ 20 Nm
❑ Remove with articulated
wrench AF 24 - T40175-
3 - Seal
❑ Renew
4 - O-ring
❑ Renew
5 - O-ring
❑ Renew
6 - Valve unit
7 - Oil filter
❑ 22 Nm
❑ Remove and install with
oil filter tool - 3417- .
8 - Bolt
❑ 15 Nm
9 - Connection
10 - Seal
❑ Renew
11 - Engine oil cooler
❑ Observe notes
⇒ page 210
❑ Ensure clearance to ad‐
jacent components
❑ Connection diagram for coolant hoses ⇒ page 238
❑ Removing and installing ⇒ page 226
12 - Seal
❑ Renew
3. Oil filter, engine oil cooler and oil pressure switch (engine codes CAWA, CAWB, CBFA, CCTA, CCTB, BZB, CGYA)
225
CC 2010 ➤ , Eos 2006 ➤ , Golf 2004 ➤ , Golf 2009 ➤ , Passat 2006 ➤ , ...
4-cyl. injection engine (1.8 and 2.0 l engine, chain drive) - Edition 08.2018
13 - Bolt
❑ Tightening sequence ⇒ page 39
3.2
Removing and installing engine oil cool‐
er
Special tools and workshop equipment required
♦ Drip tray for workshop hoist - VAS 6208-
Removing
Proceed as follows:
WARNING
The cooling system is under pressure when the engine is hot!
Danger of scalding by steam and hot coolant.
Cover filler cap on expansion tank with a cloth and open care‐
fully to release pressure.
– Drain coolant ⇒ page 241 .
– Remove bracket for ancillaries ⇒ page 50 .
– Unscrew bolts -4 and 5- and remove engine oil cooler -3- to‐
gether with seal -2-.
Installing
Installation is carried out in the reverse order. When installing,
note the following:
•
Specified torques ⇒ page 225
Note
♦ Renew gaskets and seals.
♦ Secure all hose connections with the correct type of hose clips
(same as original equipment) ⇒ EKTA (Electronic parts cata‐
logue) .
226
Rep. gr.17 - Lubrication
2024 VW Passat Owner's Manual
VW Passat B7 Service & Repair Manual
VW Passat B6 Service & Repair Manual
